Dumbwaiter Elevator Wholesale

Product description of the dumbwaiter elevator wholesale

LD dumbwaiter elevator is in the service of the fixed lifting equipment, floor has a capsules, in terms of its size and structure, the capsules are not allowed in, the car running again two columns or slope Angle and vertical direction is less than 15 ° vertically between the rigidity of rail.For the delivery of some light books, documents, food, etc., but is not allowed to enter the car, by the door button control.

Product Parameter (Specification) of the dumbwaiter elevator wholesale

1) lift counterweight shall be installed in the same well as the cage.

2) elevator shaft is generally completely closed by non-porous walls, floor and roof.Only the following openings are allowed:

(1) layer door;

(2) maintenance door, trap door and cleaning door;

(3) in case of fire, exhaust vents for exhaust gas and smoke;

(4) a permanent opening between the shaft and the machine room (cover) or the pulley.

3) when the shaft is not required to prevent fire from spreading to protect the building, and the shaft is not required to be completely closed, the height of all other walls shall not be less than 2 except the entrance surface.5 m.At the entrance of the well, from the floor station to the ground 2.Mesh or perforated plate can be used for height above 5m.The hole size of mesh or perforated plate shall not be greater than 75mm whether measured horizontally or vertically.

4) the door of the machine room shall not be less than 0 at any time.6 m by 0.6m, and the door should lock.

5) floor doors without holes shall be installed at the well opening facing the cage entrance.When the door is closed, the clearance between the doors or between the doors and posts, lintel or ground sill should be as small as possible, no more than 6mm.

Production Details of dumbwaiter elevator wholesale

Shop floor display of dumbwaiter elevator wholesale